optoway SPM-9100VW-1T1RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2009 v2.0 1 SPM-9100VW-1T1RG (rohs compliant) 850 nm / 3 gb/s optical multi-mode digital diagnostic transmitter/receiver ********************************************************************************************************************************************************************** features l smpte 297-2006 compatible l speed from 50 mbps to 3gbps with up to 1000 m multi-mode fiber l distance up to 300 m for 3g-sdi l support video pathological patterns for sd-sdi, hd-sdi and 3g-sdi l single transmitter with simplex lc l single receiver with simplex lc l based on industry standard sfp l sff-8472 digital diagnostic function l ttl laser disable input l ttl tx_fault output l ttl rx_los output l single +3.3 v power supply l rohs-6 compliant l 0 to 70 o c operation l hot pluggable l class 1 laser international safety standard iec-60825 compliant applications l smpte 297-2006 compliant electrical-to-optical interfaces l high-density video routers description the SPM-9100VW-1T1RG is a optical multi-mode transmitter/receiver module designed to transmit/receive optical serial digital signals as defined in smpte 297-2006. it supports from 50 mbps to 3 gbps and is specifically designed for transmitted the smpte 259m, smpte 344m, smpte 292m and smpte 424m sdi pathological patterns. it is with the sfp 20-pin connector to allow hot plug capability. digital diagnostic functions are available via an i 2 c. it is with 850 nm vcsel transmitters. the transmitter can transmit signal from 50 mbps to 3 gbps with up to 1000 m of multi-mode fiber. a maximum distance of 300 m is achievable with 3gbps pathological signals. laser safety this multi-mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information tx rx p/no. type bit rate (mb/s) (nm) power (dbm) (nm) sen. (dbm) package temp ( o c) rohs compliant SPM-9100VW-1T1RG 1-tx+1-rx 50 to 3000 850 -2 to -7 850 0 to -15 lc sfp with dmi 0 to 70 yes link distance sdi bit rate max. link distance (m) 3g-sdi 2.97gbps 300 hd-sdi 1.485gbps 500 sd-sdi 270mbos 1,000
optoway SPM-9100VW-1T1RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2009 v2.0 2 absolute maximum ratings exposure to absolute maximum rating conditions for extended periods may affect device reliability. absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating case temperature tc 0 70 o c power supply voltage vcc 0 4 v esd tolerance on all pins 1 kv hbm relative humidity --- 5 95 % rh non-condensing recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating case temperature tc 0 70 o c baud rate 50 3000 mb/s power supply current icc 140 200 ma transmitter specifications (0 o c < tc < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical optical transmit power po -7 -2 dbm 1 output center wavelength l 830 850 870 nm output spectrum width dl --- 1 nm rms ( ) extinction ratio er 5 7.5 db relative intensity noise rin -120 db/hz 135 ps 2, smpte 424m 270 ps 2, smpte 292m 800 ps 2, smpte 344m optical rise time / fall time tr / tf 1.5 ns 2, smpte 259m electrical differential input voltage v ih - v il 200 1200 mvp-p ac coupled input disable input voltage -- low v tdis,l 0 0.8 v tx output enabled disable input voltage -- high v tdis,h 2.0 vcc+0.3 v tx ouput disabled output tx_fault -- low v ol 0 0.5 v output tx_fault -- high v oh 2.5 vcc+0.3 v v oh 2.5 vcc+0.3 v scl, sda v ol 0 0.5 v 1. output power is power coupled into a 62.5/125 m m multi-mode fiber. 2. 20% to 80%, unfiltered. receiver specifications (0 o c < tc < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical wavelength of operation 780 850 880 nm 0 --- -15 dbm pathological sensitivity for smpte 424m 2.97 gb/s sen 0 -15 dbm prbs 2 23 -1, ber=1e-12 0 --- -16 dbm pathological sensitivity for smpte 292m 1.485 gb/s sen 0 -16 dbm prbs 2 23 -1, ber=1e-12 signal detect -- asserted pa --- --- -16 dbm transition: low to high signal detect -- deasserted pd -28 --- --- dbm transition: high to low signal detect -- hysteresis 1 6 db optical return loss -27 db
optoway SPM-9100VW-1T1RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2009 v2.0 3 electrical cml output (differential) 550 660 850 mvp-p ac coupled output 135 ps 3, smpte 424m 270 ps 3, smpte 292m 800 ps 3, smpte 344m optical rise time / fall time tr / tf 1.5 ns 3, smpte 259m output los voltage -- low v ol 0 0.5 v i ol =-1.6ma, 1 ttl unit load output los voltage -- high v oh 2.5 vcc+0.3 v i oh =40 m a, 1 ttl unit load v oh 2.5 vcc+0.3 v scl, sda v ol 0 0.5 v 3. 20% to 80%, unfiltered. module definition module definition pin 5 pin 6 interpretation by host 4 scl sda serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, scl and sda appear as no connector (nc). when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway SPM-9100VW-1T1RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2009 v2.0 4 connection diagram pin name function notes 1 vee signal ground 2 tx_fault transmitter fault indicator (active high, open-drain) 3 nc no connection 4 vee signal ground 5 scl serial i 2 c clock 6 sda serial i 2 c data 7 vee signal ground 8 rx_los receiver loss of signal indicator (active high, open-drain) 9 nc no connection 10 nc no connection 11 vee signal ground 12 rx- negative differential output 13 rx+ positive differential output 14 vee signal ground 15 vcc rx power supply 16 vcc tx power supply +3.3v 5%, internal connected 17 vee signal ground 18 tx+ positive transmitter data in 19 tx- negative transmitter data in ac coupled differential lines with 100 ohm differential termination inside the module 20 tx_dis transmitter disable internal 4.7 k pull-up. the bias current and modulation current are turned off if tx1_dis = high.
optoway SPM-9100VW-1T1RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2009 v2.0 5 recommended circuit schematic 100nf vee 100 differential rx - rx + vcc_tx vcc_rx nc tx_fault nc tx_dis 16 15 8 9 17 vcc 3.3v 10 rx_los scl sda 4.7k 5 6 nc tx - tx + vee vee vee vee vee 14 2 4 1 12 3 11 7 13 10uf 1uh 100nf 10uf 1uh 100nf 10uf 4.7k rd - rd + re-clocker i2c data i2c clk vcc 3.3v 20 tx_dis 100 differential 18 19 td + td - re-clocker tx_fault rx_los 4.7k 4.7k vcc 3.3v vcc 3.3v 1. consult the chipset manufacturer s applications information for biasing required for tx outputs. some chipset outputs are internally biased and may not need external bias resistor. package diagram ( units in mm) note: specifications subject to change without notice.
optoway SPM-9100VW-1T1RG *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 3/1/2009 v2.0 6 revision history version subject release date 1.0 initial datasheet 2008/11/1 2.0 add tx_fault and rx_los function 2009/3/1
|
